如何安装SolidWorks2010软件

绝忘者

有了解SolidWorks2010软件的战友吗?急切恳求大家告知.如何安装SolidWorks2010软件,尽可能说得详细一点.本人是完全不会装软件.真是急死我了!            

eye12345

不知你有没有和谐补丁，有的话就打上，一般里面的TXT文件里就有步骤说明的，多为英语
我装的是SW2011，先用虚拟光驱打开那个4－5G左右大的ISO格式文件，然后点SETUP，事先先断网，然后~~

Using
1) Install SW2011 using any of serials
        0001 0001 0736 0361 JK3Q HDJ3
        0101 0000 1289 1488 R4H5 Q533
        0000 0000 0000 3486 Q5HF FG98
        0001 1234 5678 8012 5559 Q7KJ
you can use any other valid LOCAL (not NETWORK) SW Serial too!

At SW2011 SP0.0 Setup DO NOT INPUT serials for SW Motion, SW Simulation or SW Flow Simulation!

2) Copy folder "setup" from crack to <SW2010 progdir> and overwrite original one

3) Run <SW2010 progdir>\setup\i386\swlmwiz.exe

you have to wait for free SSQ's windows and click OK in every window

first window "Thank you for using SolidSQUAD's SolidWorks 2011 release!" > OK
second window "Trial Reset Successfuly! Perfoming activation.." > OK
fird window "All done! Enjoy!" > OK

4) If you've got a problem with crack on 64bit computer (after first SSQ's window you get a message " Error: Can not initialize library (%d, %d, %d)" or " Error: Can not open handle (%d, %d, %d)")
you need to run <<SW2010 progdir>\setup\i386\x64_fix\ServiceInst.exe and repeat steps described in 3)

That's all

eye12345

故事可以很长，但结果只有一个，哈哈~~~要详细的话就得一匹布那么长
~~~~ 打到累，去洗白白先了

绝忘者

哦,谢谢了,我看一下吧